The Thrombus Extractor Capturer is designed for the removal of thrombus when connected to one of the syringes included in the system. It has a rapid exchange design (RX) with a single proximal lumen and a double distal lumen. The catheter is compatible with 0.014”/ 0.36 mm guidewires.
Catheter’s shaft displays a configuration of proximal single lumen and distal double lumen:
The extraction hole is located at the distal end showing a beveled shape. The catheter ends in an atraumatic, rounded tip specially designed to avoid damages in the arteries.
The thrombus extraction catheter incorporates a stiffening mandrel (stylet). The use of this mandrel is optional and its purpose is to prevent the catheter from kinking during its advancement towards the treatment area
Capturer is provided with two radiopaque markers. The furthest one is located at the tip while the second marker is located 15 mm more proximally and helps to measure the length of the lesion.
The proximal shaft has an outer diameter of 1.4 mm and its proximal end incorporates a standard luer connector to facilitate attachment to the extension line and to the thrombus extraction syringe.
The distal part has a maximum outer diameter of 1.6 mm. The whole system is compatible with 6F guiding catheters (minimal inner diameter 0.070” / 1.78 mm). Catheter’s distal end is coated with a durable hydrophilic solution (HYDRAX PLUS), which minimizes friction and improves catheter’s trackability.
Two extraction syringes, a stopcock, an extension line and two filter baskets to collect and deposit the clots removed from the patient are included.
The components of catheter are latex free.
See IFU for further information. Available to download.
The Capturer thrombus extraction catheter is especially indicated for the removal of fresh, soft emboli and thrombi from the coronary or peripheral vessels, with a minimum diameter of 2 mm.